Tascam Sonicview 16

Digital Mixer
AD/DA conversion: 32 bit / 96 kHz
Tascam HDIA microphone preamplifier (High-Definition Instrumentation Architecture)
FPGA mixing engine with 54-bit floating-point processing and 96 kHz sampling rate
44 Input channels (40 mono, 2 stereo)
22 Flexible output busses + stereo sum with 31-band graphic EQ
Visual Interactive Ergonomic Workflow (VIEW) interface provides intuitive operation with three view modes
Multiple simultaneous views via two 7-inch colour touchscreens
Latency: 2 × Fs (20.8 µs) in mixing engine, 0.51 ms analogue-to-analogue
Integrated Dante interface with 64 inputs and outputs (supports redundancy, AES67, DDM and SMPTE 2110)
USB audio interface with 32 inputs and outputs
Internal two-track recording/playback to SD card or USB drive
Four multi-effects processors
16 + 1 100 mm motorised faders
16 Encoders with colour LEDs
16 LC displays with colour LEDs for channel names as well as displays for input level and dynamic level reduction
18 Individually assignable buttons
Seven user-defined fader levels and eight DCA groups
Gigabit Ethernet connection (1000 BaseT)
Remote control and offline editing via Tascam Sonicview software for Windows, macOS and iOS
Two Tascam expansion slots (expansion cards available for 32-track SDXC recorders as well as MADI, AES/EBU and analogue signals – not included)
Power switch with protection
Dimensions (W x H x D): 472 x 228.1 x 554.4 mm
Weight: 13 kg

Connections:16x Balanced 3-pin XLR mic/line input
8x Balanced 6.3 mm jack line input
Max. input level: +32 dBu
2x 6.3 mm jack insert
3-Pole XLR talkback input
2x RCA stereo inputs L/R
16x Balanced 3-pole XLR line output
6.3 mm jack stereo headphone output
3.5 mm jack stereo headphone output
2x 3-pole XLR monitor output
Max. output level: +24 dBu
4-pole XLR lamp connection
6.3 mm jack Footswitch connector
BNC socket Wordclock-In
BNC socket Wordclock-Out/Thru
2x USB connector (type-B and type-C)
GPIO with eight inputs/outputs via Sub-D25 connector